P0341 - Camshaft Position Sensor A Circuit Range/Performance Bank 1 or Single Sensor
P0341 is a generic powertrain diagnostic trouble code indicating Camshaft Position Sensor A Circuit Range/Performance Bank 1 or Single Sensor. It relates to the Ignition System / Misfire system.
DTC Breakdown (SAE J2012)
| System | Powertrain (P) |
| Type | Generic |
| Subsystem | Ignition System / Misfire |
| Fault Index | 41 |
| Standard | SAE J2012 / ISO 15031-6 |
What does diagnostic code P0341 mean?
The engine control module logged P0341 after detecting a range/performance in the camshaft position sensor circuit, which is vital for calculating ignition and fuel timing.
Severity Level & Driveability Details
Severity: High
The engine may stall without warning while driving, presenting a severe safety hazard, and in some cases, the vehicle will not start at all.
Common Symptoms of P0341
- Engine cranking but failing to start (no start condition).
- Sudden engine stalling during operation.
- Rough idling, misfires, or engine hesitation.
- Check engine light illuminated.
Typical Causes for P0341
- Failed camshaft position sensor.
- Corroded connector pins or damaged wiring harness on the sensor.
- Damaged reluctor wheel teeth.
- Engine timing belt or chain that has jumped timing teeth.
Diagnostic and Troubleshooting Steps
Use an oscilloscope to check the sensor square-wave signal while cranking. If the signal is missing, check reference voltage (5V or 12V) and ground at the connector plug.
Typical Repairs and Fixes
- Replacing the failed camshaft position sensor.
- Repairing damaged sensor wiring harness.
- Replacing the timing chain/belt and tensioners.
- Replacing the damaged reluctor wheel.
Sensor Location & Parts Involved
The crankshaft sensor is typically near the flywheel or crank pulley, while the camshaft sensor is near the top of the cylinder head.
Clearing Code & Recurrence
Reset codes with a scan tool to verify the sensor signal is detected and active.
Emissions & Smog Inspection Impact
Misfires and improper fuel injector synchronization increase unburned tailpipe emissions.
Free Check Engine Code Cheat Sheet (PDF)
Got your answer? Keep the top 50 most common diagnostic codes, their meanings, severity levels, and quick fixes handy in your vehicle's glovebox.
Related Diagnostic Codes
Sources & References
This diagnostic guide is compiled and verified against the following authority sources:
- NHTSA safety recall logs
- SAE J2012 standard guidelines
Frequently Asked Questions about P0341
What does the camshaft position sensor A circuit range performance code P0341 mean?
The engine control module logged P0341 after detecting a range/performance in the camshaft position sensor circuit, which is vital for calculating ignition and fuel timing.
Is it safe to drive with the camshaft position sensor A circuit range performance code P0341 active?
No, a sensor fault poses a high stalling risk.
How much does it cost to repair a camshaft position sensor A circuit range performance code P0341 fault?
A replacement sensor costs $40-$120. Labor to install the sensor is $80-$200. Total cost to resolve the fault is $150-$400.
What are the common causes of the camshaft position sensor A circuit range performance code P0341?
Trigger conditions for the camshaft position sensor A circuit range performance code P0341 include: Failed camshaft position sensor., Corroded connector pins or damaged wiring harness on the sensor., Damaged reluctor wheel teeth..
Can I clear the check engine light for camshaft position sensor A circuit range performance code P0341?
Reset codes with a scan tool to verify the sensor signal is detected and active.
Will the camshaft position sensor A circuit range performance code P0341 cause an inspection failure?
Misfires and improper fuel injector synchronization increase unburned tailpipe emissions.