P0141 - O2 Sensor Heater Circuit Bank 1 Sensor 2
P0141 is a generic powertrain diagnostic trouble code indicating O2 Sensor Heater Circuit Bank 1 Sensor 2. It relates to the Fuel & Air Metering system.
DTC Breakdown (SAE J2012)
| System | Powertrain (P) |
| Type | Generic |
| Subsystem | Fuel & Air Metering |
| Fault Index | 41 |
| Standard | SAE J2012 / ISO 15031-6 |
What does diagnostic code P0141 mean?
The engine control module logged P0141 after detecting a fault specifically in the oxygen sensor heater circuit for Bank 1, Sensor 2. The heater circuit is responsible for rapidly warming the O2 sensor to its operating temperature (~600°F) upon cold start.
Severity Level & Driveability Details
Severity: Moderate
Moderate. A heater circuit failure means the sensor takes much longer to warm up, keeping the engine in open-loop mode longer and increasing cold-start emissions.
Common Symptoms of P0141
- Check engine light illuminated.
- Poor fuel economy caused by incorrect oxygen sensor feedback.
- Engine stumbling, rough idling, or minor hesitation.
- Failing tailpipe emissions test due to incorrect exhaust feedback.
Typical Causes for P0141
- Failed oxygen sensor heater circuit for Bank 1 Sensor 2 (typically a burned-out internal heater element).
- Corroded wiring or loose electrical connector at the sensor plug.
- Blown O2 sensor circuit fuse.
- Exhaust leaks near the oxygen sensor location, introducing unmetered air.
Diagnostic and Troubleshooting Steps
Measure resistance across the heater terminal pins on the O2 sensor itself using a digital multimeter. A failed sensor will show an open circuit (infinite resistance), confirming a burned-out internal heater element.
Typical Repairs and Fixes
- Replacing the Bank 1 Sensor 2 oxygen sensor to resolve the internal heater circuit failure.
- Repairing damaged wiring harness or connector plugs at the sensor.
- Replacing the blown O2 sensor fuse.
- Repairing exhaust leaks near the sensor.
Sensor Location & Parts Involved
The oxygen sensor is located in the exhaust pipe, either upstream (Sensor 1) or downstream (Sensor 2) of the catalytic converter.
Clearing Code & Recurrence
Clear the code using an OBD2 scanner and perform a drive cycle to reset the monitors.
Emissions & Smog Inspection Impact
Can cause rich running (excess carbon monoxide and hydrocarbons) or lean running (excess nitrogen oxides).
Free Check Engine Code Cheat Sheet (PDF)
Got your answer? Keep the top 50 most common diagnostic codes, their meanings, severity levels, and quick fixes handy in your vehicle's glovebox.
Related Diagnostic Codes
Sources & References
This diagnostic guide is compiled and verified against the following authority sources:
- EPA Emissions OBD Guide
- SAE J2012 specifications
Frequently Asked Questions about P0141
What does the Bank 1 Sensor 2 O2 sensor heater code P0141 mean?
The engine control module logged P0141 after detecting a fault specifically in the oxygen sensor heater circuit for Bank 1, Sensor 2. The heater circuit is responsible for rapidly warming the O2 sensor to its operating temperature (~600°F) upon cold start.
Is it safe to drive with the Bank 1 Sensor 2 O2 sensor heater code P0141 active?
Yes, but engine fuel efficiency will decrease until the sensor is replaced.
How much does it cost to repair a Bank 1 Sensor 2 O2 sensor heater code P0141 fault?
Replacement parts cost $80-$200. Labor to replace the sensor is $70-$150 depending on rust and access.
What are the common causes of the Bank 1 Sensor 2 O2 sensor heater code P0141?
Trigger conditions for the Bank 1 Sensor 2 O2 sensor heater code P0141 include: Failed oxygen sensor heater circuit for Bank 1 Sensor 2 (typically a burned-out internal heater element)., Corroded wiring or loose electrical connector at the sensor plug., Blown O2 sensor circuit fuse..
Can I clear the check engine light for Bank 1 Sensor 2 O2 sensor heater code P0141?
Clear the code using an OBD2 scanner and perform a drive cycle to reset the monitors.
Will the Bank 1 Sensor 2 O2 sensor heater code P0141 cause an inspection failure?
Can cause rich running (excess carbon monoxide and hydrocarbons) or lean running (excess nitrogen oxides).