P0113 - Intake Air Temperature Sensor 1 Circuit High Bank 1
P0113 is a generic powertrain diagnostic trouble code indicating Intake Air Temperature Sensor 1 Circuit High Bank 1. It relates to the Fuel & Air Metering system.
DTC Breakdown (SAE J2012)
| System | Powertrain (P) |
| Type | Generic |
| Subsystem | Fuel & Air Metering |
| Fault Index | 13 |
| Standard | SAE J2012 / ISO 15031-6 |
What does diagnostic code P0113 mean?
The powertrain control module logged P0113 due to a high input fault in the IAT sensor circuit.
Severity Level & Driveability Details
Severity: Moderate
The engine runs in a default backup mode, which can cause poor fuel control and potential engine stalling.
Common Symptoms of P0113
- Engine hesitation, stumbling, or stalling.
- Rough running at idle.
- Lack of power on acceleration.
- Check engine light illuminated.
Typical Causes for P0113
- Dirty or contaminated IAT sensor elements.
- Intake air leaks or cracked intake boot downstream of the sensor.
- Failed IAT sensor assembly.
- Damaged wiring harness or loose electrical plug for the sensor.
Diagnostic and Troubleshooting Steps
Inspect intake tubes for leaks. Clean the sensor elements using a specialized electronic cleaner spray. Monitor live sensor readings on a scan tool while revving the engine.
Typical Repairs and Fixes
- Cleaning the IAT sensor elements.
- Replacing the cracked intake air tube.
- Replacing the IAT sensor assembly.
- Repairing damaged sensor wiring.
Sensor Location & Parts Involved
The IAT sensor is located in the intake air ducting, between the air filter box and the throttle body.
Clearing Code & Recurrence
Clear the code with a scanner to verify that the sensor readings rise smoothly.
Emissions & Smog Inspection Impact
Causes incorrect fuel-air ratios, increasing unburned tailpipe emissions.
Free Check Engine Code Cheat Sheet (PDF)
Got your answer? Keep the top 50 most common diagnostic codes, their meanings, severity levels, and quick fixes handy in your vehicle's glovebox.
Related Diagnostic Codes
Sources & References
This diagnostic guide is compiled and verified against the following authority sources:
- EPA Technical Standards
- SAE J2012 reference guide
Frequently Asked Questions about P0113
What does the IAT sensor 1 circuit high input code P0113 mean?
The powertrain control module logged P0113 due to a high input fault in the IAT sensor circuit.
Is it safe to drive with the IAT sensor 1 circuit high input code P0113 active?
Yes, but drive carefully to avoid stalling.
How much does it cost to repair a IAT sensor 1 circuit high input code P0113 fault?
Cleaning the sensor is cheap ($15). A new IAT sensor is $120-$250, and labor is $70-$150.
What are the common causes of the IAT sensor 1 circuit high input code P0113?
Trigger conditions for the IAT sensor 1 circuit high input code P0113 include: Dirty or contaminated IAT sensor elements., Intake air leaks or cracked intake boot downstream of the sensor., Failed IAT sensor assembly..
Can I clear the check engine light for IAT sensor 1 circuit high input code P0113?
Clear the code with a scanner to verify that the sensor readings rise smoothly.
Will the IAT sensor 1 circuit high input code P0113 cause an inspection failure?
Causes incorrect fuel-air ratios, increasing unburned tailpipe emissions.